630327
GTIN: 4046548001983
Rubber buffered angle bracket for PSENopt.
On request
Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
630326
GTIN: 4046548001990
Adjustable angle bracket for PSENopt.
On request
630346
GTIN: 4046548001839
Test rod for checking the function, diameter 30 mm, hand protection.
On request
630345
GTIN: 4046548001846
Test rod for checking the function, diameter 14 mm, finger protection.
On request
630712
GTIN: 4046548057492
Mounting bracket for PSEN op2S / 4S, PU = 2 pieces.
On request
630963
GTIN: 4046548074802
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 165 cm for a beam distance
of 300 mm. Number of mirrors: 4. As a possible accessory, the
fixed base unit "PSEN op Protective Base" can be fastened.
On request
630962
GTIN: 4046548074291
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 120 cm for a beam distance
of 400 mm. Number of mirrors: 3. As a possible accessory, the
fixed base unit "PSEN op Protective Base" can be fastened.
On request
630964
GTIN: 4046548074819
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 165 cm for a beam distance
of 400 mm. Number of mirrors: 4. As a possible accessory, the
fixed base unit "PSEN op Protective Base" can be fastened.
On request
630832
GTIN: 4046548082098
Single-channel light guard / transmitter, for use as a muting sensor,
supply voltage 24 V, connector M12, 4-pin. Please note
that the receiver (630831) must be ordered separately.
On request
630821
GTIN: 4046548077070
Sensor T-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1.
On request
630822
GTIN: 4046548077087
Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,
active.
On request
630824
GTIN: 4046548077100
Mounting set for fixing two muting arms to a basis
light guard of the PSEN opXX-xx-xxx/1 series.
On request
630820
GTIN: 4046548077063
Sensing device L-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1.
On request
631061
GTIN: 4046548077131
Mounting kit for installation without dead zones of two Advanced lightguards
over the corner.
On request
631070
GTIN: 4046548077117
Programming adapter for the PSEN opXX-A series. Using the PC Software
all the functions (muting, blanking, cascading) of the
light guards of the Advanced series can be set. The dongle can
also be used to save configurations in the light guard
and to transfer it to other light guards. 3x M12 connector adapter: 12-
pin, muting: 5-pin, connection configuration: 4-pin Ethernet. Connection
cables are not supplied with the device.
On request
630823
GTIN: 4046548077094
Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,
passive.
On request
631182
GTIN: 4046548086409
Mounting kit for light guards of the series PSENopt SL in O form.
Lateral attachment to the profile. PU = 4 mounting brackets
On request
631180
GTIN: 4046548086287
Mounting kit for light guards of the series PSENopt SL in C form.
Lateral attachment to the profile. PU = 2 mounting brackets
On request
631181
GTIN: 4046548086294
Mounting kit for light guards of the series PSENopt SL in L form.
Lateral attachment to the profile. PU = 2 mounting brackets
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer