text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content
  1. Home
  2. Drive technology
  3. Servo amplifier
  4. PMCprotego D - servo drives
  5. Accessories PMCprotego D
  • 1(current)
  • 2
23 Products found
PMCprotego D.CAN-Adapter 01-24A
8176300
GTIN: 4046548056891
PMCprotego D.CAN-Adapter 01-24A

Phase-out article

Fieldbus junction box for PMCprotego D (size 1.5 A to 24 A) Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC Expansion Card PosI/O
8176278
GTIN: 4046548057928
PMC Expansion Card PosI/O

Phase-out article

Card can be used in PMCprotego Connector X5 (e.g. for Encoder emulation). Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego motor connector kit
8176330
GTIN: 4046548057942
PMCprotego motor connector kit

Phase-out article

consisting of connector X9 and shielded terminal for devices up to 24 A. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
Brake resistor 600W/23R/T/U
8176332
GTIN: 4046548059236
Brake resistor 600W/23R/T/U

Phase-out article

suitable for the PMCprotego D/24A Type: FZECQU 400x65-23 Performance at 40? C/100 % ED: 600 W Resistance value: 23 OHM Temperature switch 180? C: Signal contact 2A/24 V DC (DC11) UL version. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
Brake resistor 600W/33R/T/U
8176372
GTIN: 4046548059250
Brake resistor 600W/33R/T/U

Phase-out article

suitable for the PMCprotego D/01-12A and PMCtendo DD4/01-20A Type: FZECQU 400 x 65-33 Performance at 40? C/100 % ED: 600 W Resistance value: 33 OHM Temperature switch 180? C: Signal contact 2A/24 V DC (DC11) UL version. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
Brake resistor 1600W/33R/T/U
8176374
GTIN: 4046548059267
Brake resistor 1600W/33R/T/U

Phase-out article

suitable for the PMCprotego D/01-12A and PMCtendo DD4/01-20A Type: FZZCQU 500 x 65-33 Performance at 40? C/100 % ED: 1600 W Resistance value: 33 OHM Temperature switch 180? C: Signal contact 2A/24 V DC (DC11) UL version. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
Brake resistor 1600W/23R/T/U
8176334
GTIN: 4046548065329
Brake resistor 1600W/23R/T/U

Phase-out article

suitable for the PMCprotego D/24A Type: FZZCQU 500 x 65-23 Performance at 40? C/100 % ED: 1600 W Resistance value: 23 OHM Temperature switch 180? C: Signal contact 2A/24 V DC (DC11) UL version. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC Expansion Card PosI/O-AIO
8176108
GTIN: 4046548065398
PMC Expansion Card PosI/O-AIO

Phase-out article

Card can be used in PMCprotego Connector X5 (e.g. for Encoder emulation) Connector X3C (2 analogue inputs and 2 analogue outputs). Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.CAN-Adapter 48-72A
8176470
GTIN: 4046548065749
PMCprotego D.CAN-Adapter 48-72A

Phase-out article

Fieldbus junction box for PMCprotego D (size 48 A and 72 A) Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M2/C2B2/015/1Q5/S1
8177153
GTIN: 4046548074376
PMCcable M2/C2B2/015/1Q5/S1

Phase-out article

Power cable; Cable assembled on both sides Connector <> con.23 round connector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x (2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtendo SZ.4x…K bis SZ.73…K; Length 15 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M2/C2B2/005/1Q5/S1
8177151
GTIN: 4046548074352
PMCcable M2/C2B2/005/1Q5/S1

Phase-out article

Power cable; Cable assembled on both sides Connector <> con.23 round connector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x (2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtendo SZ.4x…K bis SZ.73…K; Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/D4B6/015/Q25/S1
8177103
GTIN: 4046548074154
PMCcable FD/D4B6/015/Q25/S1

Phase-out article

Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15 connector <> con.23 round connector 12-pin SpeedTec; suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ4x to SZ8x; Length: 15 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/D4B6/010/Q25/S1
8177102
GTIN: 4046548074147
PMCcable FD/D4B6/010/Q25/S1

Phase-out article

Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15 connector <> con.23 round connector 12-pin SpeedTec; suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ4x to SZ8x; Length: 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/D4B6/005/Q25/S1
8177101
GTIN: 4046548074130
PMCcable FD/D4B6/005/Q25/S1

Phase-out article

Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15 connector <> con.23 round connector 12-pin SpeedTec; suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ4x to SZ8x; Length: 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M2/C2B2/010/1Q5/S1
8177152
GTIN: 4046548074369
PMCcable M2/C2B2/010/1Q5/S1

Phase-out article

Power cable; Cable assembled on both sides Connector <> con.23 round connector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x (2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtendo SZ.4x…K bis SZ.73…K; Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotegoD 01-24 spare part plug set
8176674
GTIN: 4046548075212
PMCprotegoD 01-24 spare part plug set

Phase-out article

suitable for the device series PMCprotegoD 01-24 consisting of: Connector X3A, X3B, X4A, X4B Connector X0, X8. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMC Expansion Card PROFINET
680150
GTIN: 4046548076912
PMC Expansion Card PROFINET

Phase-out article

Card can be used in PMCtendo DD5 & PMCprotego D.

On request
PMCcable M2/C2B5/005/1Q0/S1
8177251
GTIN: 4046548083972
PMCcable M2/C2B5/005/1Q0/S1

Phase-out article

Power cable; Cable assembled on both sides Connector <> con.15 round connector 9-pin SpringTec; No. of wires and cross section (4x1,0+1x (2x1,0))suitable for PMCprotego D.01-24 and the motors PMCtendo SZ.3x; Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable FD/D4B8/005/Q25/S1
8177271
GTIN: 4046548080155
PMCcable FD/D4B8/005/Q25/S1

Phase-out article

Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15 connector <> con.15 round connector 12-pin SpringTec; suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ.3x; Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D connector set X8Y + X4A
8176348
GTIN: 4046548086225
PMCprotego D connector set X8Y + X4A

Phase-out article

Set consists of connector X8Y Push in spring connection connector X4A Screw connection with tension sleeve for device to 24A Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
  • 1(current)
  • 2

Save basket

Create a new order or get an individual offer

Select intended use