关闭
您在国际Pilz网站上
请输入国家
选择您所在的国家/地区,以获取国内内容
Fieldbus junction box for PMCprotego D (size 1.5 A to 24 A) Interfaces:
CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
PMC Expansion Card PosI/O
逐步淘汰文章
Card can be used in PMCprotego Connector X5 (e.g. for Encoder
emulation).
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
consisting of connector X9 and shielded terminal for devices up to 24
A.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
Brake resistor 600W/23R/T/U
逐步淘汰文章
suitable for the PMCprotego D/24A Type: FZECQU 400x65-23 Performance
at 40? C/100 % ED: 600 W Resistance value: 23 OHM Temperature switch
180? C: Signal contact 2A/24 V DC (DC11) UL version.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
Brake resistor 600W/33R/T/U
逐步淘汰文章
suitable for the PMCprotego D/01-12A and PMCtendo DD4/01-20A Type:
FZECQU 400 x 65-33 Performance at 40? C/100 % ED: 600 W Resistance
value: 33 OHM Temperature switch 180? C: Signal contact 2A/24 V DC
(DC11) UL version.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
Brake resistor 1600W/33R/T/U
逐步淘汰文章
suitable for the PMCprotego D/01-12A and PMCtendo DD4/01-20A Type:
FZZCQU 500 x 65-33 Performance at 40? C/100 % ED: 1600 W Resistance
value: 33 OHM Temperature switch 180? C: Signal contact 2A/24 V DC
(DC11) UL version.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
Brake resistor 1600W/23R/T/U
逐步淘汰文章
suitable for the PMCprotego D/24A Type: FZZCQU 500 x 65-23 Performance
at 40? C/100 % ED: 1600 W Resistance value: 23 OHM Temperature switch
180? C: Signal contact 2A/24 V DC (DC11) UL version.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
Card can be used in PMCprotego Connector X5 (e.g. for Encoder
emulation) Connector X3C (2 analogue inputs and 2 analogue outputs).
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
Fieldbus junction box for PMCprotego D (size 48 A and 72 A) Interfaces:
CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
PMCcable M2/C2B2/015/1Q5/S1
逐步淘汰文章
Power cable; Cable assembled on both sides Connector <> con.23 rou nd
connector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x
(2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtendo
SZ.4x…K bis SZ.73…K; Length 15 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
PMCcable M2/C2B2/005/1Q5/S1
逐步淘汰文章
Power cable; Cable assembled on both sides Connector <> con.23 rou nd
connector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x
(2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtendo
SZ.4x…K bis SZ.73…K; Length 5 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
PMCcable FD/D4B6/015/Q25/S1
逐步淘汰文章
Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15
connector <> con.23 round connector 12-pin SpeedTec; suitable for all
PMC servo controllers (DD5, protego) and the motors PMCtendo SZ4x to
SZ8x; Length: 15 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
PMCcable FD/D4B6/010/Q25/S1
逐步淘汰文章
Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15
connector <> con.23 round connector 12-pin SpeedTec; suitable for all
PMC servo controllers (DD5, protego) and the motors PMCtendo SZ4x to
SZ8x; Length: 10 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
PMCcable FD/D4B6/005/Q25/S1
逐步淘汰文章
Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15
connector <> con.23 round connector 12-pin SpeedTec; suitable for all
PMC servo controllers (DD5, protego) and the motors PMCtendo SZ4x to
SZ8x; Length: 5 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
PMCcable M2/C2B2/010/1Q5/S1
逐步淘汰文章
Power cable; Cable assembled on both sides Connector <> con.23 rou nd
connector 8-pin SpeedTec; No. of wires and cross section (4x1.5+1x
(2x1.0)) suitable for PMCprotego D.01-24 and the motors PMCtendo
SZ.4x…K bis SZ.73…K; Length 10 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
suitable for the device series PMCprotegoD 01-24 consisting of:
Connector X3A, X3B, X4A, X4B Connector X0, X8.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
PMCcable M2/C2B5/005/1Q0/S1
逐步淘汰文章
Power cable; Cable assembled on both sides Connector <> con.15 rou nd
connector 9-pin SpringTec; No. of wires and cross section (4x1,0+1x
(2x1,0))suitable for PMCprotego D.01-24 and the motors PMCtendo SZ.3x;
Length 5 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
PMCcable FD/D4B8/005/Q25/S1
逐步淘汰文章
Feedback cable for EnDat 2.2; Cable assembled on both sides Sub-D15
connector <> con.15 round connector 12-pin SpringTec; suitable for all
PMC servo controllers (DD5, protego) and the motors PMCtendo SZ.3x;
Length 5 m.
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
Set consists of
connector X8Y Push in spring connection
connector X4A Screw connection with tension sleeve
for device to 24A
Important information: This item is at the end of the product lifecycle
and therefore will no longer be available in the foreseeable future.
Please get in touch with your PILZ contact to find a suitable
alternative or successor product.
根据要求
下列产品已经加入您的购物车
保存购物车
建立新的订单 或 安排单独报价