驱动技术

Supply module for PMC SI6 drive controller. Technical data at 3 x 400 V AC: Nominal input current: 50 A. Maximum input current: 180% for 5s / 150% for 30s. Nominal power 20kW Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Terminal set for supply module PS6A34 Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Terminal set for drive controllers SI6A262R with STO using terminals Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Multi-axis PMC SI6 drive controller Technical data at 3 x 400 V AC: Nominal output current: 1x 12 A @ 4kHz / 1x 10 A @ 8kHz. Imax: 210% for 2s / 250% for 2s. Apparent power: 8.3 KVA. Without brake resistor. Option: Safety module SR6 (STO using terminals) and EtherCat. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Multi-axis PMC SI6 drive controller Technical data at 3 x 400 V AC: Nominal output current: 2x 25 A @ 4kHz / 2x 20 A @ 8kHz. Imax: 210% for 2s / 250% for 2s. Apparent power: 2x 17.3 KVA. Without brake resistor. Option: Safety module SR6 (STO using terminals) and EtherCat. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Terminal set for drive controllers SI6A161R with STO using terminals Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

EZ-Servo motors: Mo = 3,0Nm Io = 2,88A UN = 400V nN = 3000min-1 Jmot = 0,93 kgcm2; Encoder ECI 1118-G2 EnDat2.2 singleturn; without brake;

EZ-Servo motors: Mo = 8,4Nm; Io = 9,78A; UN = 400V; nN = 6000min-1; Jmot = 2,98kgcm2; Encoder ECI 1118-G2 EnDat2.2 singleturn; without brake;

EZ-Servo motors: Mo = 20,8Nm; Io = 14,0A; UN = 400V; nN = 3000min-1; Jmot = 21,6kgcm2; Encoder ECI 1118-G2 EnDat2.2 singleturn; without brake;

EZ-Servo motors: Mo = 41,8Nm; Io = 26,5A; UN = 400V; nN = 3000min-1; Jmot = 34kgcm2; Encoder ECI 1118-G2 EnDat2.2 singleturn; without brake; with Forced ventilation.

Rear section module for drive controllers of size 1 or 2: SC6A162, SC6A261, SI6A161, SI6A162, SI6A261 # The quick fastening clamps for attaching the copper rails and an insulation connection piece are contained in the scope of delivery. The copper rails are not included in the scope of delivery. These must have a cross-section of 5 x 12 mm. Insulation end sections are available separately. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Encoder cable for EnDat 2.1/2.2 digital. Cable assembled on both sides Sub-connector <> con.17 round connec tor 12-pin. No. of wires and cross section (3 x 2 x 0,14 mm² + 2 x 0,25 mm²). suitable for all PMC servo controllers (SC6, SI6, SD6/X4) and the motors EZ40-EZ80. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Rear section module for size 3 supply module: PS6A34 # The quick fastening clamps for attaching the copper rails and an insulation connection piece are contained in the scope of delivery. The copper rails are not included in the scope of delivery. These must have a cross-section of 5 x 12 mm. Insulation end sections are available separately. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Power cable. cable assembled on both sides Crimp connectors <> con.23 round con nector 8-pin. No. of wires and cross section (4 × 2,5 + 2 × (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ503 to EZ703. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Power cable. cable assembled on both sides Crimp connectors <> con.23 round con nector 8-pin. No. of wires and cross section (4 × 4,0 + (2 × 1,0) + (2 × 0,75)) mm² . suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ702 to EZ703. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Power cable. cable assembled on both sides Crimp connectors <> con.40 round con nector 8-pin. No. of wires and cross section (4 × 2,5 + 2 × (2 × 1,0)) mm². suitable for all PMC servo controllers (SC6, SI6) and the motors EZ705. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Drive-integral safety card for the servo amplifier series PMCprotego D implementable safety level: SIL 3 in accordance with EN/IEC 62061 supported safety functions: STO, SS1, SS2, SOS, SLS, SSR, SDI, SBC, SBT, SLI, SLP. System requirements for PMCprotego D: Product version 1.6; Firmware >= 6.25

Braking resistoer for power supply PS6. Technical data: Type Steel-grid fixed resistor. Resistance 22 Ohm. Power 2500 W. with temperature switch. with UL certification. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.