Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
5 PMMA Altu glass plates of 45 cm length with relevant mounting
brackets for protection of the front screen of a safety ...
On request
PMMA acrylic tube for sealing and protecting a
safety light guard with a length of 120 cm of the series "PSEN op.../1".T ...
On request
PMMA acrylic tube for sealing and protecting a
safety light guard with a length of 135 cm of the series "PSEN op.../1".T ...
On request
End caps for actuator PSEN cs3.x, PSEN cs4.x (spare part, PU =
50 pieces).
On request
Expanded mounting kit with 3 degrees of freedom for fixing the
light guard series PSEN optII, 2-parts.
On request
Expanded mounting kit with 3 degrees of freedom for fixing the
light guard series PSEN optII, 3-parts.
On request
Laser alignment aid for light guard series PSEN opt II.
On request
One-way screws, one-way slot, M4x10, material stainless steel, PU = 10
pieces, suitable for actuator: PSEN cs1.1, PSEN c ...
On request
One-way screws, one-way slot, M4x12, material stainless steel, PU = 10
pieces, suitable for actuator: PSEN cs1.1, PSEN c ...
On request
PSENvip AP2
Phase-out article
Set of mounting plates for transmitter PSENvip E and receiver PSENvip R.
Important information: This item is at the end ...
On request
One-way screws, one-way slot, M4x20, material stainless steel, PU = 10
pieces, suitable for actuator: PSEN cs5.1n, PSEN ...
On request
PSENvip AS2
Phase-out article
Set of mounting plates for transmitter PSENvip E and receiver PSENvip R.
Important information: This item is at the end ...
On request
One-way screws, one-way slot, M4x26, material stainless steel, PU = 10
pieces, suitable for actuator: PSENmag with space ...
On request
Single-channel light guard / receiver with N/O / N/C outputs, for use asa
muting sensor, supply voltage 24 V, connector ...
On request
Reflected light sensor with N/O / N/C outputs for use as a mutingsensor,
supply voltage 24 V, connector M12, 4-pin. Plea ...
On request
Single-channel light guard / transmitter, for use as a muting sensor,
supply voltage 24 V, connector M12, 4-pin. Please ...
On request
Mounting plate for 40mm standard profiles
On request
Mounting bracket for sliding doors
On request
PSENvip AT spring mount
Phase-out article
Adjustment templates to position between the upper and lower tool. To
align PSENvip during installation and tool change. ...
On request
PSEN sg escape release pin
Phase-out article
Pin for escape release with red knob (spare part).
Important information: This item is at the end of the product lifecy ...
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer