text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content
  1. Home
  2. Drive technology
  3. Servo amplifier
  • 6
  • 7(current)
  • 8
300 Products found
PMCprotego D.03/A00/0/0/2/110-230VAC
8176819
GTIN: 4046548085556
PMCprotego D.03/A00/0/0/2/110-230VAC

Phase-out article

Technical Details at 3 x 230 AC supply voltage: Permanent output current: 5,0 A; Imax (2 sec.) = 9,0 A; Imax (5 sec.) = 6,0 A; Power consumption in S1 operation: 2,0 kVA Internal brake resistor and mains filter additional hardware option: Expansion Card Profinet Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.24/030/0/C/2/208-480VAC
8176637
GTIN: 4046548085648
PMCprotego D.24/030/0/C/2/208-480VAC

Phase-out article

Technical Details at 3 x 400 V AC supply voltage: Permanent output current: 24 A; Imax (5 sec.) = 48 A; Power consumption in S1 operation: 18 kVA Internal brake resistor and mains filter Additonal options: -Fan controller, card in Slot 2 Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.12/000/0/0/2/110-230VAC
8176814
GTIN: 4046548085587
PMCprotego D.12/000/0/0/2/110-230VAC

Phase-out article

Technical Details at 3 x 230 V AC supply voltage: Permanent output current: 12,0 A; Imax (2 sec.) = 24,0 A; Imax (5 sec.) = 24,0 A; Power consumption in S1 operation: 4,5 kVA Internal brake resistor and mains filter Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.24/000/0/0/2/110-230VAC
8176816
GTIN: 4046548085709
PMCprotego D.24/000/0/0/2/110-230VAC

Phase-out article

Technical Details at 3 x 230 V AC supply voltage: Permanent output current: 24,0 A; Imax (2 sec.) = 48,0 A; Imax (5 sec.) = 48,0 A; Power consumption in S1 operation: 9,0 kVA Internal brake resistor and mains filter Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.03/000/0/0/2/110-230VAC
8176812
GTIN: 4046548085563
PMCprotego D.03/000/0/0/2/110-230VAC

Phase-out article

Technical Details at 3 x 230 V AC supply voltage: Permanent output current: 5,0 A; Imax (2 sec.) = 9,0 A; Imax (5 sec.) = 6,0 A; Power consumption in S1 operation: 2,0 kVA Internal brake resistor and mains filter Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.01/A00/0/0/2/110-230VAC
8176818
GTIN: 4046548085549
PMCprotego D.01/A00/0/0/2/110-230VAC

Phase-out article

Technical Details at 3 x 230 AC supply voltage: Permanent output current: 2,5 A; Imax (2 sec.) = 4,5 A; Imax (5 sec.) = 3,0 A; Power consumption in S1 operation: 1,0 kVA Internal brake resistor and mains filter additional hardware option: Expansion Card Profinet Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.24/000/0/P/2/110-230VAC
8176817
GTIN: 4046548085716
PMCprotego D.24/000/0/P/2/110-230VAC

Phase-out article

Technical Details at 3 x 230 V AC supply voltage: Permanent output current: 24,0 A; Imax (2 sec.) = 72,0 A; Imax (5 sec.) = 48,0 A; Power consumption in S1 operation: 9,0 kVA Internal brake resistor and mains filter Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.12/000/0/P/2/110-230VAC
8176815
GTIN: 4046548085594
PMCprotego D.12/000/0/P/2/110-230VAC

Phase-out article

Technical Details at 3 x 230 V AC supply voltage: Permanent output current: 12,0 A; Imax (2 sec.) = 30,0 A; Imax (5 sec.) = 24,0 A; Power consumption in S1 operation: 4,5 kVA Internal brake resistor and mains filter Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.06/A00/0/0/2/208-480VAC
8176639
GTIN: 4046548089523
PMCprotego D.06/A00/0/0/2/208-480VAC

Phase-out article

Technical data at 3 x 400 V AC: Continuous output current: 6 A; Imax (2 s) = 18 A; Imax (5 s) = 12 A; Power consumption in S1 mode: 4.5 kVA Integral brake resistor Further hardware options: Expansion card PROFINET. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.03/20G/0/0/2/208-480VAC
8178001
GTIN: 4046548110166
PMCprotego D.03/20G/0/0/2/208-480VAC

Phase-out article

Servo amplifier, continuous output current at 3 x 400 VAC: 3 A, Peak output current for 2 s: 9 A, peak output current for 5 s: 6 A, power consumption in S1 mode: 2.2 kVA, integrated brake resistor, hardware options: expansion card PMCprotego S3.SN 8DI 6DO EI BR, expansion card PROFIBUS DP Slave Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.03/A0G/0/0/2/208-480VAC
8178002
GTIN: 4046548110180
PMCprotego D.03/A0G/0/0/2/208-480VAC

Phase-out article

Technical data at 3 x 400 V AC: Continuous output current: 3 A; Imax (2s) = 9 A; Imax (5 s) = 6 A; Power consumption in S1 mode: 2.2 kVA. Integral brake resistor. Further hardware options: Expansion card PMCprotego S3.SN 8DI 6DO EI BR, Expansion card PROFINET. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCprotego D.06/01G/0/0/2/208-480VAC
8178003
GTIN: 4046548112351
PMCprotego D.06/01G/0/0/2/208-480VAC

Phase-out article

Servo amplifier, continuous output current at 3 x 400 VAC: 6 A, Peak output current for 2 s: 18 A, peak output current for 5 s: 12 A, power consumption in S1 mode: 4.5 kVA, integrated brake resistor, hardware options: expansion card PMCprotego S3.SN 8DI 6DO EI BR, expansion card PosI/O.

On request
PMCcable M4/E1C6/005/1Q5/S1
8C000175
GTIN: 4046548105445
PMCcable M4/E1C6/005/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/010/1Q5/S1
8C000176
GTIN: 4046548106381
PMCcable M4/E1C6/010/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 10 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/015/1Q5/S1
8C000177
GTIN: 4046548106398
PMCcable M4/E1C6/015/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 15 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/018/1Q5/S1
8C000178
GTIN: 4046548106503
PMCcable M4/E1C6/018/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 18 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/020/1Q5/S1
8C000179
GTIN: 4046548106510
PMCcable M4/E1C6/020/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 20 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/025/1Q5/S1
8C000180
GTIN: 4046548106527
PMCcable M4/E1C6/025/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 25 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/2M5/1Q5/S1
8C000181
GTIN: 4046548106534
PMCcable M4/E1C6/2M5/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 2,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
PMCcable M4/E1C6/7M5/1Q5/S1
8C000182
GTIN: 4046548106541
PMCcable M4/E1C6/7M5/1Q5/S1

Phase-out article

Power cable withencoder EnDat 3.0; suitable for all PMC servo controllers (SC6, SI6) and the motors from EZ301 to EZ703; cable assembled on both sides Crimp connectors <> con.23 round connector 9-pin; No. of wires and cross section (4 × 1.5 + (2 × 0.75) + (2 × AWG22)) mm²; maximum lengths without output choke up to 50m / with output choke 100m possible. Length 7,5 m. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

On request
  • 6
  • 7(current)
  • 8

Save basket

Create a new order or get an individual offer

Select intended use