Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
Terminating plug with a 120 Ω resistor between Pin 4 and Pin 5. Suitable
for the Interface: CANopen.
On request
Y adapter for connecting PSEN ml b or PSEN ml s to PDP67, 1 x 8-
pin M12 female connector, straight, A-coded on 2 x 5-pin M12
male connector, straight, A-coded
On request
Adapter for using the PITgatebox IOLS without further series connection
of Pilz sensors, 8-pin M12 male connector, straight, A-coded and 5-pin
M12 female connector, straight, A-coded to 5-pin M12 male connector,
straight, A-coded, cable length: 0.15 m
On request
Y-adapter to connect the transmitter and receiver for PSENopt II
Advanced uncoded to an FS input, 5-pin M12 male connector (X3,
evaluation unit connection), straight, A-coded to 5-pin M12 female
connector (X1, transmitter), straight, A-coded and 5-pin M12 female
connector (X2, receiver), straight, A-coded
On request
Cable, adapter, IP68, M12 female connector, black, straight, 4-pin, A-
coded on M12 male connector, black, angled, 5-pin, A-coded,
PUR, 0.1 m, 4× 0.34 mm², black, to connect the sensors PSENmag
(safety switch)/PIT en1.0 (enabling switch) to PSS67 and PDP67.
On request
Cable, adapter, IP68, M12 female connector, black, straight, 4-pin, A-
coded on M12 male connector, black, angled, 5-pin, A-coded,
PUR, 0.1 m, 3× 0.34 mm², black, to connect a PSENopt M12
transmitter (light curtains) to PSS67 and PDP67.
On request
Cable, adapter, IP68, M12 female connector, black, straight, 8-pin, A-
coded on M12 male connector, black, angled, 5-pin, A-coded,
PUR, 0.1 m, 5× 0.25 mm², black, with shielding (wire mesh), to
connect a PSENcode sensor (coded safety switch) to
PSS67 and PDP67.
On request
Cable, adapter, IP68, M12 female connector, black, straight, 8-pin, A-
coded on M12 male connector, black, angled, 5-pin, A-coded,
PUR, 0.1 m, 4× 0.25 mm², black, with shielding (wire mesh), to
connect a receiver of the sensors PSEN op2B/PSEN op4F/PSEN
op4H/PSEN op4B light curtains) to PSS67 and PDP67.
On request
Cable Y-adapter- with T-plug-in connector, IP67, M12 male connector (X2,
evaluation device), 8-pin, A-coded on M12 female connector (X1,
sensor/next plug-in connector), 8-pin, A-coded and M8
female connector (X3, sensor), black, straight, 8-pin, A-coded, PUR,
0.25 m, 8× 0.14 mm², yellow, to connect PSENcode and PSENslock.
On request
Cable Y-adapter- with T-plug-in connector, IP67, M12 male connector (X2,
evaluation device), 8-pin, A-coded on M12 female connector (X1,
sensor/next plug-in connector), 8-pin, A-coded and M12
female connector (X3, sensor), black, straight, 8-pin, A-coded, PUR,
0.25 m, 8× 0.25 mm², yellow, to connect PSENcode and PSENslock.
On request
Accessories PSENopt, Y-cable with connector straight M12 for PSEN op4B-T/S/L
light guard
On request
Cable, adapter, IP67, M12 male connector, black, straight, 8-pin, A-
coded on M8 female connector, black, straight, 8-pin, A-coded, PUR,
0.25 m, 8× 0.14 mm², yellow, internal wiring 1:1 for all 8 signals,
converter to connect PSEN sensors.
On request
Cable, Y-adapter- with T-plug-in connector, IP67, M12 male connector(X2,
evaluation device), 8-pin, A-coded on M12 female connector (X1, sensor),
8-pin, A-coded and M8 female connector (X3, signal output /Lock_Unlock),
black, straight, 4-pin, A-coded, PUR, 0.25 m, 4× 0.25 mm², black,
to disconnect auxiliary signals when connecting PSENcode and
PSENslock.
On request
Cable, adapter, IP68, M12 female connector, black, straight, 8-pin, A-
coded on M12 male connector, black, straight, 5-pin, A-coded,
PUR, 0.1 m, 5× 0.25 mm², yellow, to connect a receiver from the
basic versions of the sensors PSEN op4F&/1 and PSEN op4H&/1 (lightcurtain)
to PSS67 and PDP67.
On request
Cable, adapter, IP68, M12 female connector, black, straight, 8-pin, A-
coded on M12 male connector, black, straight, 5-pin, A-coded,
PUR, 0.1 m, 5× 0.25 mm², black, with shielding (wire mesh), to
connect a PSENslock sensor (safety gate monitoring) to
PSS67 and PDP67.
On request
Connection cable, 4-pin M8 female connector, angled, A-coded, on 5-
pin M12 male connector, straight, A-coded, cable length: 2m
On request
Connection cable, 4-pin M8 female connector, straight, A-coded, on 5-
pin M12 male connector, angled, A-coded, cable length: 2m
On request
Cable Y-adapter with Y-plug-in connector, IP67, M12 male connector (X2,
evaluation device), black, straight, 8-pin, A-coded on M12
female connector (X2, sensor/next plug-in connector), black, straight,
8-pin, A-coded and M8 female connector (X3, sensor), black, straight,
8-pin, A-coded, PUR, 0.25 m, 8× 0.14 mm², yellow, incorrect insertion ofthe
connections electrically excluded by internal wiring, to
connect PSENcode and PSENslock.
On request
Plug-in connector, Y-adapter, IP67, M12 male connector (X1, evaluationdevice),
8-pin, A-coded on M12 female connector (X2, sensor/next
plug-in connector), 8-pin, A-coded and M12 female connector (X3,sensor),
8-pin, A-coded, incorrect insertion of the connections electricallyexcluded by internal
wiring, to connect PSENcode, to
directly connect PSENslock on the sensor.
On request
Plug-in connector, Y-adapter, IP67, M8 male connector (X1, evaluationdevice),
8-pin, A-coded on M8 female connector (X2, sensor/next
plug-in connector), 8-pin, A-coded and M8 female connector (X3, sensor),
8-pin, A-coded, incorrect insertion of the connections electricallyexcluded by internal
wiring, to connect PSENcode, to
directly connect PSENslock on the sensor.
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer