text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content

PSSnet GW1 MOD-EtherCAT

Product ID: 311601
GTIN: 4046548074000
PSSnet, gateway, standard, protocol converter between Modbus/TCP Server and EtherCAT Slave, supports CANopen over EtherCAT, for use with PSS 3000, PSS 4000, PMI, PMCprimo and third-party products,conf...  More

Phase-out article


Item

Save basket

Create a new order or get an individual offer

Select intended use

PSSnet, gateway, standard, protocol converter between Modbus/TCP Server and EtherCAT Slave, supports CANopen over EtherCAT, for use with PSS 3000, PSS 4000, PMI, PMCprimo and third-party products,configuration with web server, 1 RJ45 port Modbus/TCP, 2 RJ45 ports EtherCAT, transmission rates 10/100 MBit/s, auto-negotiation, data length 512Byte. Important information: This item is at the end of the product lifecycle and therefore will no longer be available in the foreseeable future. Please get in touch with your PILZ contact to find a suitable alternative or successor product.

Approval CE  
UKCA  
cULus Listed  
 
Purpose of U1 Module supply  
Supply voltage (V) 24  
24  
Type of supply voltage U1 DC  
Power consumption DC 3  
Fieldbus interface EtherCAT  
Fieldbus device type Slave  
Name of fieldbus protocol CANopen over EtherCAT  
Selectable transmission rates 100 MBit/s  
Connection fieldbus RJ45  
Fieldbus operating modes Auto-MDIX  
Galv. isolation fieldbus Yes  
Type of galvanic isolation Functional insulation  
Number of MODBUS interfaces 8  
Modbus connection RJ45  
Modbus device type Server  
Modbus operating modes Auto-MDIX  
Autonegotiation  
Modbus selectable trans. rate 10 MBit/s  
100 MBit/s  
Galv. isolation from Modbus Yes  
Ambient temperature standard EN 60068-2-14  
Ambient temperature 0  
60  
Storage temperature standard EN 60068-2-1/-2  
Climatic suitability standard EN 60068-2-30  
EN 60068-2-78  
Humidity rating 93 % r. h. at 40 °C  
Condensation permitted? Not permitted  
Perm. operating height ASL 2000 m  
EMC to standard ... EN 61131-2  
Vibration to standard ... EN 60068-2-6  
Acc. shock to standard1 15g  
Clearance & creepage dist. to EN 61131-2  
Overvoltage category II  
Pollution degree clear.&creep. 2  
Protection type standard EN 60529  
Protection type, mounting
Protection type, housing IP20  
Terminal protection type
Potential isolation 1 between EtherCAT and system voltage  
Type of potential isolation 1 Functional insulation  
Potential isolation 2 between Modbus and system voltage  
Type of potential isolation 2 Functional insulation  
DIN-rail dimensions 35 x 7.5 EN 50022  
Housing material lower section PC  
Housing material front plate PC  
Connection terminal Screw terminal plug-in  
Spring-loaded terminal, plugin  
Flex. cond. c/s AWG info 24 - 12 AWG  
Height dimension 96  
Width dimension 22.5  
Depth dimension 110.4  
Net weight 90  
Gross weight 110  
 
RoHS directive 2011/65/EU  
2015/863/EU  
RoHS conformity yes  
RoHS exceptions no  
RoHS except.s acc. to direct. 7a  
7c I  
REACh compliance Contains no SVHC substances  
REACh included substances Lead  
%-part of the pollutant > 0,1  
CAS No. 7439-92-1  
SCIP entry available 0  
WEEE classification (08/2018) 6 small IT-/communic. device  
 
ECLASS version ECLASS-13  
ECLASS Reference Feature 27242208  
ETIM Version ETIM-9.0  
ETIM Reference Group EG000024  
ETIM Reference Feature EC001423  
UNSPSC 25 32131023  
GTIN 4046548074000  
Volume 0  dm3
Harmonized System Code 85176200  
Type of tariff number TARIC  
Use of customs tariff number Ausfuhr  
Einfuhr  
Quantity per packaging unit 1  
 

Obligatory accessories

Spring terminals PNOZ mmcxp, 1 pc.
Spring terminals PNOZ mmcxp, 1 pc. 783542
Spring-loaded terminals, for fieldbus modules on PNOZ mm0.xp, 1 set.
Screw terminals PNOZ mmcxp, 1 pc.
Screw terminals PNOZ mmcxp, 1 pc. 793542
Plug-in screw terminal, fieldbus modules on PNOZ mm0.xp, 1 set.